From the operator's platform to the mower deck, John Deere QuikTrak™ Mowers have a compact and functional design:
Whether mowing hills or on level terrain, trimming or mowing straight-away, the operator of a John Deere QuikTrak is able to affect the performance of the machine with their body:
The innovative QuikTrak design puts the operator in line with the rear axle to keep traction when mowing across slopes, providing greater control.
John Deere QuikTrak Mowers are designed, tested, and manufactured to provide the best commercial mowing machines available:
A well-designed mower deck can make the difference between just getting the job done and getting eye-catching results. The 7-gauge, 0.179-in. (4.6-mm) fabricated mower deck delivers a higher quality of cut in more diverse conditions to enhance mowing performance.
Key features of the fabricated mower deck include:
The wide-discharge opening and raised deflector provide even clipping dispersal for an excellent finished appearance in all conditions.
Caster wheels with flat-free tires contribute to a smooth, even cutting job:
The QuikTrak is equipped with a floating mower deck that offers several advantages over a fixed mower deck:
Mower cutting height can be set from 1.25 in. (3.2 cm) to 5 in. (12.7 cm) in 0.25-in. (0.64-cm) increments:
Mower deck shields are easy to remove for access to the drive belt and other service points.
Optional mulching attachment and special mulching blades are available:
A commercial-quality, 18.5-hp (13.8-kW) at 3600 rpm, air-cooled engine powers the QuikTrak™ Mower:
The engine is equipped with a replaceable oil filter for longer engine life.
Engine oil fill/check tube, oil filter, and oil drain are located close together for easy and convenient service.
QuikTrak Mowers use a heavy-duty hydrostatic pump and wheel-motor drive system that gives reliable and consistent performance and long life:
Two Hydro-Gear™, 0.61-cu in. (10-cc) axial piston, variable-displacement pumps provide hydraulic power to the wheel motors:
Two individual, 12-cu in. (196.6-cc), piston wheel motors power the QuikTrak drive wheels. Their heavy-duty construction and super-efficient axial-piston design provides superior performance and seamless power to the wheels:
A spin-on-type replaceable hydraulic oil filter is conveniently located:
A hydraulic fluid oil reservoir is located behind the leaning pad:
Transmission bypass valves are provided on each hydrostatic pump to permit moving the QuikTrak without the engine running.
Hydro-Gear is a trademark of Hydro-Gear Limited Partnership AF Holding Company.
Controls are color coded and logically placed to make them easy for the operator to find and use:
A tire brake is provided to give stability for parking the vehicle on hillsides and for transport; it should be engaged whenever the machine is not being used:
An easy-to-use cutting height adjustment system allows the operator to adjust the mower deck cutting height with no tools and minimal effort:
NOTE: Additional information on mower cutting height adjustment can be found in the mower deck section.
High-quality mower deflector directs cut clippings across the lawn for optimum appearance. Plastic material flexes if contacted to minimize damage.
Key safety features of QuikTrak Mowers include:
QuikTrak mower decks are evaluated by the manufacturer (John Deere Turf Care) and conform to American National Standards Institute (ANSI) B71.4 2004 safety certification specifications for commercial turf care equipment.
All service components are easy to access:
Dual-stage air cleaner is easy to reach and easy to service:
Engine oil service points are grouped together in easy-to-reach locations:
Simply raising the leaning pad exposes the hydrostatic oil reservoir, control linkage, and other service areas.
A periodic service chart is provided for convenience in keeping up on required service.
Remove service access shields on the mower deck, battery box, etc. to service the machine:
Threaded ball and socket rod ends are used throughout the QuikTrak Mowers:
Access to check and service the hydrostatic pumps and motors is readily available at the rear of the machine.
Transmission bypass valves enable moving the vehicle without the engine running.
A secure battery box is provided to protect the battery, for reliable operation:
Four tie-down locations, two at the front and two at the rear, are provided for safely towing or anchoring the vehicle.
Compare the specifications of up to 4 models
Key Specs | 636m-mower Current Model |
---|---|
Engine Manufacturer/model | FS600V |
Engine Power | Gross at 3,600 rpm: 18.5 hp 13.8 kW |
Fuel tank capacity | 5.5 U.S. gal. 20.8 L |
Mower deck Size | 36 in. 91.4 cm |
Blade tip speed | 18,900 fpm 5,761 m/min |
Transmission | Hydrostatic |
Speed range | 0-8.2 mph 0-13.2 km/h |
Drive wheels | 18x8.5-10 Turf Master |
Caster wheels | 11x4-5 |
Warranty | 24 months |
Engine | |
Manufacturer/Model | FS600V |
Power | Gross at 3,600 rpm, 18.5 hp 13.8 kW |
Displacement | 36.8 cu in. 603 cc |
Cylinders | Two, V-twin |
Crankcase capacity | With filter, 2.2 qt 2.1 L |
Oil filter | Full flow, replaceable |
Lubrication | Full pressure |
Cooling | Forced air |
Air cleaner | Dry type, dual stage |
Fuel system | |
Fuel type | Gasoline |
Fuel consumption | |
Fuel tank capacity | 5.5 U.S. gal. 20.8 L |
Fuel tank switch/shut-off valve | Yes |
Electrical system | |
Charge system | At 3,600 rpm, 15 amp |
Battery voltage | 12 V |
Cold cranking amp | 300 amp |
Hour meter | Digital |
Operator presence starting system | Yes |
Drivetrain | |
Transmission | Hydrostatic |
Hydraulic pumps | Hydro-Gear, 0.61 cu in. 10 cc |
Wheel motors | Hydro-Gear HGM-P, 12 cu in. 196 cc |
Travel speed | Speed range 0-8.2 mph 0-13.2 km/h Forward Infinite, 0-8.2 mph Infinite, 0-13.2 km/h Reverse Infinite, 0-3.5 mph Infinite, 0-5.6 km/h |
Speed and direction control | Twin hand-controlled levers |
Hydraulic capacity | With filter, dry, 5 qt 4.7 L |
Hydraulic oil cooler | Yes |
Filter | Spin-on replaceable |
Buyer's note | |
Tires | |
Drive wheels | 18x8.5-10 Turf Master |
Rear tires | |
Load rating | 4 PR |
Brakes | |
Dynamic braking | Dual hand-controlled levers |
Park brake | Tire engagement |
Park brake actuation | Hand lever |
PTO | |
Type | Electro-magnetic with brake, 125 lb-ft 169 Nm |
Drive | Dual B-section V-belt with Kevlar® cord |
Mower decks | |
Size | 36 in. 91.4 cm |
Deck construction | Fabricated steel, floating mount system |
Deck thickness | 7 gauge 0.18 in. 4.6 mm |
Discharge | Side |
Height-of-cut range | Increments 0.25 in. 0.64 cm 1.5-5 in. 3.8-12.7 cm |
Cutting width | 36 in. 91 cm |
Blades | |
Length | 18 in. 45.7 cm |
Thickness | 0.203 in. 0.516 cm |
Blade tip speed | 18,900 fpm 5,761 m/min |
Number | Two |
Wheels | |
Caster wheel type | No-flat semi-pneumatic with sealed bearings |
Caster wheels | 11x4-5 |
Front anti-scalp rollers | |
Rear anti-scalp rollers | |
Dimensions | |
Length | 62 in. 157.5 cm |
Width | Deflector down, 49.5 in. 125.7 cm |
Height | 46 in. 117 cm |
Weight | With full fuel and oil, 731 lb 332 kg |
The mulching attachment allows converting the mower deck so it can be used to perform the mulching function (grass or leaves).
These mulching attachments are used on QuikTrak™ mowers with cutting widths of 36 in. (91 cm), 48 in. (122 cm ), 52 in. (132 cm), and 61 in. (155 cm).
Operating tips when mulching:
The 3.5-bu (123-L) grass catcher provides operators with a simple, compact solution for collecting small amounts of material. The deck-mounted hopper prevents unwanted grass clippings from being dispersed onto sidewalks, parking lots, flowerbeds, water features, and other landscaping features. By collecting this material, time spent cleaning up after mowing is reduced.
Installation and removal of the grass catcher is simple and fast. No drilling or additional bolt-on components are needed. Two large handles made from round tubing offer a variety of ways to handle the grass catcher.
A stainless-steel frame provides strength to the grass catcher. Strong, lightweight aluminum mesh sides are securely attached to the frame. The bottom of the hopper consists of a single piece of aluminum.
To empty the grass catcher, simply lift the hopper from the mower deck, raise the rear door latch, and open or remove the rear door.
Mower series | Compatible models |
QuikTrak™ Stand-On Mowers | 652E, 636M, 648M, 652M, 648R, and 652R
|
Commercial Walk-Behind Mowers | W36M, W48M, W36R, W48R, and W52R
|
Ordering information
Please contact a local John Deere dealer for availability and pricing information.
3.5-bu (123-L) grass catcher
Order number: LP68164
Available to meet current law in areas requiring use of mufflers under certain conditions or where needed to comply with local ordinances.
Includes instructions, spark arrester screen and mounting hardware.
© COPYRIGHT 2024 LEGACY EQUIPMENT - ALL RIGHTS RESERVED| Privacy Policy | Powered By