WR00 WHEEL RAKES

Carted Wheel Rakes

  • Easy adjustments
  • Two-arm, left, and right side only raking
  • 8, 10, and 12 wheel models 
  • Optional center kick wheel 



View Product Brochure



Features



Wheel rake arms in transport positionWheel rake arms in transport position

The raking arms and wheels fold on the cart for a minimum transport width of 2.5 m (8.2 ft). This compact design allows an operator to easily transport and store the equipment.

 

Hydraulic lock out valves and wing transport chains keep the wings safely folded up during transport.

Greater ground contact with wide wheel baseGreater ground contact with wide wheel base
Sturdy frame and high ground clearanceSturdy frame and high ground clearance

The 1.8-m (6-ft) wheel width helps keep the raking wheels in contact with the ground over rough terrain, increasing productivity. The wheel rake has 50.8 cm (20 in.) of ground clearance which helps keep the hay away from the cart frame.

One grease zerk per wheelOne grease zerk per wheel

The wheels have 7-mm (0.28-in.) diameter tines for increased wear life. The larger-sized tines will stand up to more crop and ground movement during use.

 

Grease zerks also help increase the wear life of each wheel. There is one grease zerk for each wheel and two grease zerks located on the frame to keep moving parts lubricated and operative.

Easy-to-set windrow and raking widthsEasy-to-set windrow and raking widths
Three settings for dual-spring rake arm suspensionThree settings for dual-spring rake arm suspension

The WR00 Series Carted Wheel Rake has two easy adjustment points to fine-tune windrows and gather more hay in each bale.

  1. Utilize the two-point-position pin and hole adjustment to set both windrow and raking widths.
  2. Set the adjustable dual-spring rake arm suspension to three different settings to match terrain and crop conditions.
Simple hitch adjustments for different heightsSimple hitch adjustments for different heights

The adjustable hitch allows for added versatility for the WR00 Series Wheel Rake. The wide array of tractor tire sizes, drawbar heights, and hitch adjustments add more convenience for hay operations.

Specifications


Compare the specifications of up to 4 models

Dimensions wr00-wheel-rakes
Current Model
Transport width2.5 m
8.2 ft
Transport length5.3 m
17.5 ft
Frame clearance50.8 cm
20 in.
Raking widthMaximum
6.4 m
21 ft
Windrow widthMinimum
61 cm
24 in.Maximum
129.5 cm
51 in.
Transport height2.75 m
9.0 ft
NOTE: Transport heights can vary based on unit setup. Dimensions are for reference only.
Weight
Implement669 kg
1475 lb
Shipping725 kg
1599 lb
Rake wheel
QuantityTen
Diameter140 cm
55 in.
HubsTapered bearing
Teeth per wheel40
Teeth diameter7 mm
0.27 in.
Wing
Flex up19.7 cm
50 in.
Flex down3.9 cm
10 in.
Tractor compatibility
Horsepower requirements22 kW
31 hp
SCVType
1 SCVQuantity
One
Electrical requirement
Minimum tractor size
Wheels
TransportSize
205/70-15Quantity
Two
Gauge
Safety
LightsNone
MarkingSMV
Hitch jackStandard
Safety chainStandard
Set-up time
Warranty

© COPYRIGHT 2024 LEGACY EQUIPMENT - ALL RIGHTS RESERVED| Privacy Policy | Powered ByEQHarvest logo

NOT SET