115 FLAIL SHREDDER

Drawn Flail Shredder

  • Heavy-duty gearbox
  • Steel rotor bearings
  • Convenient rear grease fittings
  • Square rotor designed for superior strength



View Product Brochure



Features



Drawn tractor hookupDrawn tractor hookup
#
The 100 Series Flail Shredder is available with a drawn tractor hookup.
Rubber deflectorsRubber deflectors
#
Front rubber deflectors keep debris and other materials under the shredder and away from the tractor and operator. Because they are made out of rubber, they will not dent or rust.
GearboxGearbox

A heavy-duty gearbox transfers power to the power-band drive belts through cross shafts with intermediate bearing supports:

  • Gearbox has a constant-duty rating of 150 hp and a maximum rating of 225 hp.
Rotor bearingsRotor bearings

The rotor bearings are now made of steel and have a three-lip seal to keep the dirt out and increase the life of the bearings.

 

The side and center bearings now have guards in order to avoid leaks and dust, increasing the life of the bearings.

Specifications


Compare the specifications of up to 4 models

Power requirements 115-flail-shredder
Current Model
Tractor PTO hp range67-149 kW
90-200 hp
Tractor RPM1,000 rpm
Gear case
Knives
Number of knives120
Knife dimensions7.87 x 63.5 x 143 mm
0.31 x 2.5 x 5.63 in.
Knife mounting system
TypeHeat-treated side slice
Knives overlap
Tip speed171 km/h
106 mph
Rotor
Rotor speed1,500 rpm
Rotor diameter139.7 mm
5.5 in.
Rotor bearingSealed, self-aligning, piloted housing, auxiliary
Bearing size41.28 mm
1.625 in.
Drivetrain
BeltsPower band, triple 5VX
PTO drivelines
Mainframe
HitchDrawn
Hood thickness6.35 mm
0.25 in.
Safety deflectorYes
Gauge wheels4 infinitely adjustable
Warning lights
Cutting capacity
Cutting width4.6 m
15 ft
Cutting height7.6 to 25.4 cm
3 to 10 in.
Dimensions
Transport width2.39 m
7.83 ft
Transport length5.82 m
19.08 ft
Weight1,497 kg
3,300 lb
Optional equipment
Easy transport
Constant velocity joint drivelineYes
Skid shoes

Accessories and Attachments

Miscellaneous

Deflectors - Rubber - BP18083

Steel deflectorsSteel deflectors
Rubber deflectorsRubber deflectors

Deflectors can be used on the front of the shredder to prevent cut material from being thrown forward. Rubber deflectors are recommended when shredding in rocky areas.

Driveline with Overrunning Clutch and Constant Velocity Joint, 1-3/4 In. Drive - AP40461

Driveline with Overrunning Clutch and Constant Velocity Joint, 1-3/8 In. Drive - AP40459

Driveline with Overrunning Clutch, 1-3/4 In. Drive - AP40460

Additional gauge wheelAdditional gauge wheel
#

Additional gauge wheels can be ordered, if needed, for improved cutting performance.

Hydraulic Cylinder (3X8) with Hoses - BP16519

Lateral Skid Plate - AP40006

Weed Separator

Center divider Center divider
#

The center divider minimizes the center strip of uncut material when clipping grass, idle acres, or non-row-crop crops.

This bundle is for use on all shredders with the following serial numbers:

  • 115 Flail Shredder (serial numbers 002485 and above)
  • 118 Flail Shredder (serial numbers 002072 and above)
  • 120 Flail Shredder (serial numbers 002258 and above)

NOTE: Previous machines did not have center-cut knives. To install, order them from Parts.

© COPYRIGHT 2023 LEGACY EQUIPMENT - ALL RIGHTS RESERVED| Privacy Policy | Powered ByEQHarvest logo

NOT SET